The newly updated Cisco 500-220 dumps contain 57 exam questions and answers that candidates can study using the 500-220 dumps PDF and 500-220 dumps VCE to help you successfully pass the Cisco Meraki Solutions Specialist 500-220 exam.
You are welcome to download the latest Cisco 500-220 dumps: https://www.leads4pass.com/500-220.html, leads4pass 500-220 dumps serve all candidates taking the Cisco Meraki Solutions Specialist 500-220 exam and guarantee you 100% Successfully passed the Cisco Meraki Solutions Specialist 500-220 exam.
Download the Cisco 500-220 PDF for free sharing online:
https://drive.google.com/file/d/1qtBCMITy6f1ulFxY1lSr0Qn9mMsMXnA-/
Share the latest Cisco 500-220 dumps exam questions and answers for free
New Question 1:
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
A. Controller disconnection behavior
B. Captive Portal strength
C. Simultaneous logins
D. Firewall and traffic shaping
E. RADIUS for splash page settings
Correct Answer: AB
New Question 2:
Refer to the exhibit. Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.
B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
C. WebEx traffic will prefer WAN 2 as long as it is up.
D. WebEx traffic will be load-balanced between both active WAN links.
Correct Answer: B
New Question 3:
For which two reasons can an organization become “Out of License”? (Choose two.)
A. licenses that are in the wrong network
B. more hardware devices than device licenses
C. expired device license
D. licenses that do not match the serial numbers in the organization
E. MR licenses that do not match the MR models in the organization
Correct Answer: BC
New Question 4:
Refer to the exhibit. Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
A. Change the primary uplink to “none”.
B. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
C. Enable load balancing.
D. Set the speed of the cellular uplink to zero.
E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
Correct Answer: BC
New Question 5:
Which design requirement is met by implementing Syslog versus SNMP?
A. when automation capabilities are needed
B. when proactive alerts for critical events must be generated
C. when organization-wide information must be collected
D. when information such as flows and client connectivity must be gathered
Correct Answer: D
New Question 6:
Refer to the exhibit. The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
A. Add a deny any/any firewall rule to the end of the firewall rules.
B. Remove the connection from Internet 1.
C. Physically disconnect all LAN ports.
D. Configure the MX appliance to Routed mode on the Addressing and VLANS page.
Correct Answer: C
New Question 7:
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager. Which outcome occurs when a user attempts to remove the “Meraki Management” profile on an iPad?
A. The “Meraki Management” profile cannot be removed.
B. The “Meraki Management” profile is removed and then pushed automatically by the Systems Manager.
C. The “Meraki Management” profile is removed. All the profiles that Systems Manager pushed are also removed.
D. The “Meraki Management” profile is removed. All the profiles Systems Manager pushed remain.
Correct Answer: C
New Question 8:
Refer to the exhibit. What are the Loss and Average Latency statistics based on?
A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security and SD-WAN > Firewall page
C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security and SD-WAN > SD-WAN and Traffic Shaping page
D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
Correct Answer: B
New Question 9:
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
A. Renew the Dashboard license.
B. License a network.
C. License more devices.
D. Call Meraki support.
E. Wait for the devices to auto-renew.
Correct Answer: AC
New Question 10:
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
A. OS updates
B. Send notification
C. Selective wipe
D. Screenshot
E. Remote Desktop
Correct Answer: CE
New Question 11:
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B. Peers contact the VPN registry at UDP port 9350.
C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D. Peers contact the VPN registry at TCP port 9350.
E. For IPsec tunneling, peers use UDP ports 500 and 4500.
Correct Answer: BC
New Question 12:
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
A. The configuration change in the bound network is combined with the template configuration inside the template.
B. The more restrictive configuration is preferred.
C. The configuration change in the bound network overrides the template configuration.
D. The template configuration overrides the configuration change in the bound network.
Correct Answer: A
New Question 13:
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based on client count, how many APs (rounded to the nearest whole number) are needed?
A. 26
B. 28
C. 30
D. 32
Correct Answer: C
New Question 14:
Refer to the exhibit. For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with RADIUS server
Correct Answer: A
New Question 15:
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
A. Wireless > Configure > Access Control
B. Wireless > Configure > Splash page
C. Wireless > Configure > Firewall and Traffic Shaping
D. Wireless > Configure > SSIDs
Correct Answer: A
…
Download the Cisco 500-220 PDF for free sharing online:
https://drive.google.com/file/d/1qtBCMITy6f1ulFxY1lSr0Qn9mMsMXnA-/
The above is only a part of Cisco 500-220 dumps exam questions and answers, you can use the above exam questions and answers to improve yourself, not only that, we welcome you to download the latest
Cisco 500-220 dumps exam questions: https://www.leads4pass.com/500-220.html (Total Questions: 57 Q&A), help you truly pass the Cisco Meraki Solutions Specialist 500-220 exam.
More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]netappexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com