[2021.3] Get the latest Fortinet NSE7_EFW-6.2 exam practice questions and free Pdf dumps from Lead4Pass

Table Of Content:

• Fortinet NSE7_EFW-6.2 Dumps Pdf
• Fortinet NSE7_EFW-6.2 Dumps Youtube
• Fortinet NSE7_EFW-6.2 Exam Practice Test
• Fortinet Discount Code 2021

Share Fortinet NSE7_EFW-6.2 exam practice questions and answers from leads4pass latest updated NSE7_EFW-6.2 dumps free of charge. Get the latest uploaded NSE7_EFW-6.2 dumps pdf from google driver online. To get the full Fortinet NSE7_EFW-6.2 dumps PDF or dumps VCE visit: https://www.leads4pass.com/nse7_efw-6-2.html (Q&As: 102). all Fortinet NSE7_EFW-6.2 exam questions have been updated, the answer has been corrected!
Make sure your exam questions are real and effective to help you pass your first exam!

^{[Fortinet NSE7_EFW-6.2 Dumps pdf]} Latest Fortinet NSE7_EFW-6.2 Dumps PDF collected by leads4pass Google Drive:
https://drive.google.com/file/d/1oSTxfjSDcMJxVjgGO8Aq2yJ0s_En8TlG/

Latest Update Fortinet NSE7_EFW-6.2 Exam Practice Questions and Answers Online Test

QUESTION 1

Refer to the exhibit, which contains a partial web filter profile configuration.
Which action will FortiGate take if a user attempts to access www.dropbox.com, which is categorized as File Sharing
and Storage?
A. FortiGate will exempt the connection based on the Web Content Filter configuration.
B. FortiGate will block the connection as an invalid URL.
C. FortiGate will block the connection based on the URL Filter configuration.
D. FortiGate will allow the connection based on the FortiGuard category-based filter configuration.
Correct Answer: C

QUESTION 2
Refer to the exhibit, which contains the output of a debug command.

Which two statements about the exhibit are true? (Choose two.)
A. The local FortiGate OSPF router ID is 0.0.0.4.
B. The local FortiGate is the backup designated router.
C. In the network connected to port4, two OSPF routers are down.
D. Port4 is connected to the OSPF backbone area.
Correct Answer: AD

QUESTION 3
Which two statements about bulk configuration changes using FortiManager CLI scripts are correct? (Choose two.)
A. When executed on the Device Database, you must use the installation wizard to apply the changes to the managed
FortiGate.
B. When executed on the Policy Package, ADOM database, changes are applied directly to the managed FortiGate.
C. When executed on the All FortiGate in ADOM, changes are automatically installed without creating a new revision
history.
D. When executed on the Remote FortiGate directly, administrators do not have the option to review the changes prior
to installation.
Correct Answer: AD

QUESTION 4
Refer to the exhibit, which contains a partial output of an IKE real-time debug.

Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
A. auto-discovery-receiver
B. auto-discovery-forwarder
C. auto-discovery-sender
D. auto-discovery-shortcut
Correct Answer: C

QUESTION 5
Refer to the exhibit, which contains the output of a web filtering diagnosis command.

Which statement explains why the cache statistics are all zeros?
A. The FortiGate web filter cache is disabled in the FortiGate configuration.
B. FortiGate is using flow-based inspection which does not use the cache.
C. The administrator has reallocated the cache memory to a separate process.
D. There are no users making web requests.
Correct Answer: A

QUESTION 6

Refer to the exhibit, which contains the output of a BGP debug command. Which statement explains why the state of
the 10.200.3.1 peer is Connect?
A. The local router has received the BGP prefixes from the remote peer.
B. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
C. The TCP session to 10.200.3.1 has not completed the 3-way handshake.
D. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the
OpenConfirm yet.
Correct Answer: C

QUESTION 7
Refer to the exhibit, which contains a partial output of an IKE real-time debug.

Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
A. auto-discovery-receiver
B. auto-discovery-forwarder
C. auto-discovery-sender
D. auto-discovery-shortcut
Correct Answer: B

QUESTION 8
In which two states is a given session categorized as ephemeral? (Choose two.)
A. A TCP session waiting for FIN ACK.
B. A TCP session waiting to complete the three-way handshake.
C. A UDP session with packets sent and received.
D. A UDP session with only one packet received.
Correct Answer: AC

QUESTION 9
Which statement describes IPS adaptive scanning?
A. Downloads signatures on-demand from FDS based on scanning requirements.
B. Determines when it is secure enough to stop scanning session traffic.
C. Determines the optimal number of IPS engines required based on system load.
D. Choose a matching algorithm based on the type of inspection being performed.
Correct Answer: B

QUESTION 10
Refer to the exhibits, which contain configuration on FortiGate and partial session information.

All traffic to the Internet currently egresses from port1. The exhibit shows partial session information for Internet traffic
from a user on the internal network.
If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user\\’s session?
A. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
B. The session would remain in the session table, and its traffic would still egress from port1.
C. The session would remain in the session table, and its traffic would start to egress from port2.
D. The session would be deleted, so the client would need to start a new session.
Correct Answer: B

QUESTION 11

Refer to the exhibit, which contains the partial output of an IKE real-time debug.
The administrator does not have access to the remote gateway.
Based on the debug output, which configuration change can the administrator make to the local gateway to
resolve the phase 1 negotiation error?
A. Change phase 1 encryption to 3DES and authentication to SHA256.
B. Change phase 1 encryption to 3DES and authentication to CBC.
C. Change phase 1 encryption to AES-CBC and authentication to SHA128.
D. Change phase 1 encryption to AES128 and authentication to SHA512.
Correct Answer: B

QUESTION 12
Refer to the exhibit, which contains a TCL script configuration on FortiManager.

An administrator has configured the TCL script on FortiManager but failed to apply any changes to the managed device
after being executed.
Why did the TCL script fail to make any changes to the managed device?
A. Changes in an interface configuration can only be done by CLI script.
B. The TCL script must start with #include.
C. Incomplete commands are ignored in TCL scripts.
D. The TCL command run_cmd has not been created.
Correct Answer: D

QUESTION 13
Refer to the exhibit, which contains the output of diagnose sys session stat.

Which two statements about the output shown are correct? (Choose two.)
A. No sessions have been deleted because of memory page exhaustion.
B. There are 0 ephemeral sessions.
C. There are 168 TCP sessions waiting to complete the three-way handshake.
D. All the sessions in the session table are TCP sessions.
Correct Answer: AB

leads4pass Fortinet Discount Code 2021

For the full Fortinet NSE7_EFW-6.2 exam dumps from leads4pass NSE7_EFW-6.2 Dumps pdf or Dumps VCE visit: https://www.leads4pass.com/nse7_efw-6-2.html (Q&As: 102 dumps)

ps.
Get free Fortinet NSE7_EFW-6.2 dumps PDF online: https://drive.google.com/file/d/1oSTxfjSDcMJxVjgGO8Aq2yJ0s_En8TlG/