leads4pass 200-301 dumps contain 1205 exam questions and answers to prepare for the latest CCNA certification exam!
Download leads4pass 200-301 dumps with PDF and VCE: https://www.leads4pass.com/200-301.html, to help you practice real questions easily and pass the exam with 100% success.
What’s more, some free exam questions and answers are shared online from leads4pass 200-301 dumps: https://drive.google.com/file/d/1IHUgbnVFua_FKQrzDe7xf7zGlzg-xj7h/
You can also take the CCNA 200-301 online practice test
| From | Number of exam questions | Exam name | Exam code | Last updated |
| leads4pass | 15 | Implementing and Administering Cisco Solutions (CCNA) | 200-301 | 200-301 dumps |
Question 1:
An office has 8 floors with approximately 30-40 users per floor. What command must be configured on the router Switched Virtual Interface to use address space efficiently?
A. ip address 192.168.0.0 255.255.0.0
B. ip address 192.168.0.0 255.255.254.0
C. ip address 192.168.0.0 255.255.255.128
D. ip address 192.168.0.0 255.255.255.224
Correct Answer: B
need ip count: 30-40 * 8 = 320 ip
255.255.254.0 – 510 ip
Question 2:
What is a characteristic of collapsed-core network topology?
A. It enables all workstations in a SOHO environment to connect on a single switch with internet access.
B. It enables the core and access layers to connect to one logical distribution device over an EtherChannel.
C. It allows wireless devices to connect directly to the core layer, which enables faster data transmission.
D. It allows the core and distribution layers to run as a single combined layer.
Correct Answer: D
Question 3:
Which feature or protocol determines whether the QOS on the network is sufficient to support IP services?
A. LLDP
B. CDP
C. IP SLA
D. EEM
Correct Answer: C
IP SLA allows an IT professional to collect information about network performance in real-time. Therefore it helps determine whether the QoS on the network is sufficient for IP services or not.
Cisco IOS Embedded Event Manager (EEM) is a powerful and flexible subsystem that provides real-time network event detection and onboard automation. It gives you the ability to adapt the behavior of your network devices to align with your business needs.
Question 4:
Refer to the exhibit.
Local access for R4 must be established and these requirements must be met:
1.
Only Telnet access is allowed.
2.
The enabled password must be stored securely.
3.
The enable password must be applied in plain text.
4.
Full access to R4 must be permitted upon successful login.
Which configuration script meets the requirements?
A. ! conf t ! username test1 password testpass1 enable secret level 15 0 Test123! line vty 0 15
login local
transport input telnet
B. ! config t ! username test1 password testpass1 enable password level 15 0 Test123! line vty 0 15
login local
transport input all
C. ! config t ! username test1 password testpass1 enable password level 1 7 Test123! line vty 0 15
accounting exec default
transport input all
D. ! config t ! username test1 password testpass1 enable secret level 1 0 Test123! line vty 0 15
login authentication
password Test123
transport input telnet
Correct Answer: A
Question 5:
DRAG DROP
Drag and drop the Rapid PVST+ forwarding state actions from the left to the right. Not all actions are used.
Select and Place:
Correct Answer:
Question 6:
What causes a port to be placed in the err-disabled state?
A. latency
B. port security violation
C. shutdown command issued on the port
D. nothing plugged into the port
Correct Answer: B
This mode is the default violation mode; when in this mode, the switch will automatically force the switch port into an error-disabled (err-disable) state when a violation occurs. While in this state, the switch port forwards no traffic. The switch port can be brought out of this error-disabled state by issuing the errdisable recovery cause CLI command or by disabling and reenabling the switch port.
Question 7:
When deploying a new network that includes both Cisco and third-party network devices, which redundancy protocol avoids the interruption of network traffic if the default gateway router fails?
A. VRRP
B. FHRP
C. GLBP
D. HSRP
Correct Answer: A
Question 8:
What are two characteristics of a small office/home office connection environment? (Choose two.)
A. It requires 10Gb ports on all uplinks.
B. It supports between 50 and 100 users.
C. It supports between 1 and 50 users.
D. It requires a core, distribution, and access layer architecture.
E. A router port connects to a broadband connection.
Correct Answer: CE
Question 9:
Refer to the exhibit. Which statement about the interface that generated the output is true?
A. Five secure MAC addresses are dynamically learned on the interface.
B. A Syslog message is generated when a violation occurs.
C. One secure MAC address is manually configured on the interface.
D. One secure MAC address is dynamically configured on the interface.
Correct Answer: C
Question 10:
What are two reasons a switch experiences frame flooding? (Choose two.)
A. A defective patch cable is connected to the switch port
B. Topology changes are occurring within spanning-tree
C. An aged MAC (able entry is causing excessive updates
D. Port security is configured globally
E. The forwarding table has overflowed
Correct Answer: AB
Question 11:
When implementing a router as a DHCP server, which two features must be configured? (Choose two)
A. relay agent information
B. address pool
C. smart-relay
D. database agent
E. manual bindings
Correct Answer: BE
Question 12:
Refer to the exhibit.
A Cisco WLC administrator is creating a new wireless network with enhanced SSID security. The new network must operate at 2.4 Ghz with 54 Mbps of throughput. Which set of tasks must the administrator perform to complete the configuration?
A. Uncheck the Broadcast SSID check box and set the Radio Policy to 802.11a/g only.
B. Check the Broadcast SSID check box and set the Radio Policy to 802.11g only.
C. Uncheck the Broadcast SSID check box and set the Radio Policy to 802.11g only.
D. Check the Broadcast SSID check box and set the Radio Policy to 802.11a only.
Correct Answer: A
Question 13:
A corporate office uses four floors in a building.
1.
Floor 1 has 24 users.
2.
Floor 2 has 29 users.
3.
Floor 3 has 28 users.
4.
Floor 4 has 22 users.
Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?
A. 192.168.0.0/24 as summary and 192.168.0.0/28 for each floor
B. 192.168.0.0/23 as summary and 192.168.0.0/25 for each floor
C. 192.168.0.0/25 as summary and 192.168.0.0/27 for each floor
D. 192.168.0.0/26 as summary and 192.168.0.0/29 for each floor
Correct Answer: C
Question 14:
Refer to the exhibit.
Which switch in this configuration becomes the root bridge?
A. SW1
B. SW2
C. SW3
D. SW4
Correct Answer: C
Question 15:
Why would an administrator choose to implement an automated network management solution?
A. to reduce operational costs
B. to support simpler password policies
C. to enable “box by box” configuration and deployment
D. to limit recurrent management costs
Correct Answer: A
…
leads4pass 200-301 dumps are dedicated to helping all candidates successfully pass the CCNA certification exam!
Use free CCNA 200-301 exam resources to help verify your recent study! You can also download the latest 200-301 dumps: https://www.leads4pass.com/200-301.html (1205 Q&A), to help you pass the CCNA certification exam 100% successfully!
