Free to share the latest updated HP HPE6-A71 exam questions and answers, all exam questions come from the exam laboratory and real-question cracking.
All HP HPE6-A71 exam questions shared on this site are provided by Lead4Pass exam experts. You can get the latest HPE6-A71 dumps, HPE6-A71 pdf, HPE6-A71 exam questions here. Get the complete HPE6-A71 dumps exam path: https://www.leads4pass.com/hpe6-a71.html (Q&A: 96).
All HP HPE6-A71 exam questions have been updated and the answers have been corrected! Make sure your exam questions are true and valid to help you pass the first exam!
[HP HPE6-A71 exam pdf] HP HPE6-A71 exam PDF uploaded from google drive, online download provided by the latest update of Lead4pass:
https://drive.google.com/file/d/13773O7a9Gq8iTIffN31mnJbzTOyM-kkX/
Latest update HP HPE6-A71 exam questions and answers online practice test
QUESTION 1
An administrator mistakenly configures the wrong VLAN setting on a managed controller\\’s interface. This causes the
controller to lose management access to the Mobility Master (MM). The administrator knows that the auto roll-back
feature will revert the managed controller to a previous configuration that was used prior to the change.
Which command can the administrator use to validate that the rollback process is successful?
A. show debug
B. show switches
C. show config status
D. show controller-ip
Correct Answer: B
QUESTION 2
Which protocol is used between Aruba Mobility Controllers (MC) and ArubaOS-Switches to negotiate tunneled node?
A. PAPI
B. GRE
C. IPSec
D. SNMP
Correct Answer: B
QUESTION 3
A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A
RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote
Mesh Portal (RMP).
Which solution should the administrator implement to provide connectivity between the office and small warehouse
buildings at the branch office location?
A. Deploy a Remote Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office
building.
B. Deploy an ArubaOS-Switch in the warehouse building with tunneled node to connect to the Remote Mesh Portal in
the office building.
C. Deploy a Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.
D. Deploy a Remote Mesh Portal in the warehouse building to connect to the Remote Mesh Portal in the office building.
Correct Answer: C
QUESTION 4
An administrator troubleshoots a roaming problem where a user loses connectivity to the network during the roaming
process. To help troubleshoot this problem, which device or devices in a wireless network initiates the roaming
process?
A. the AP
B. both the client and the controller
C. the client
D. the controller
Correct Answer: C
QUESTION 5
An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user,
assigns the firewall policies to the user, and processes some of the users\\’ traffic. Which connection method should the
administrator configure on the ArubaOS-Switch?
A. Per-port tunneled node
B. Per-user tunneled node
C. VLAN tunneled mode
D. Split-tunneled mode
Correct Answer: A
QUESTION 6
An administrator wants to implement 802.1X authentication on Ethernet ports on branch office controllers. What must
the administrator do to implement this policy?
A. Define the port as untrusted, and assign an AAA policy to the VLAN.
B. Define the port as trusted, and assign an AAA policy to the port.
C. Define the port as untrusted, and assign an AAA policy to the port.
D. Define the port as trusted, and assign an AAA policy to the VLAN.
Correct Answer: C
QUESTION 7
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
A Mobility Master (MM) manages the cluster.
The cluster contains two controllers C1 and C2.
AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (SAAC).
AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Anchor Controller (A-UAC) assigned is C1, with
C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by
AP3?
A. The AP3\\’s A-AAC switches to C1, and the user\\’s A-UAC switches to C2.
B. The AP3\\’s A-AAC switches to C1, and the user\\’s A-UAC remains on C1.
C. The AP3\\’s A-AAC remains on C2, and the user\\’s A-UAC switches to C2.
D. The AP3\\’s A-AAC remains on C2, and the user\\’s A-UAC remains on C1.
Correct Answer: D
QUESTION 8
An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of
10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.305.114. The administrator accesses an AP associated with this
cluster, reboots it, and accesses apboot mode. The administrator executes the printenv command. Which AP parameter
contains the IP addresses of the cluster members that the AP should use to connect to the cluster?
A. master_ip
B. cfg_lms
C. servername
D. nodelist
Correct Answer: D
QUESTION 9
What can the administrator determine from the configuration shown below?
A. ??2 is the Mobility Master.
B. All the controllers run in standalone mode.
C. All the controllers run in a cluster.
D. VRRP is used for Mobility Master redundancy.
Correct Answer: D
QUESTION 10
An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the
RAP, the administrator must enter a user\\’s credentials.
What is the purpose of these credentials?
A. to authenticate the RAP device
B. to authenticate users on wireless ports
C. to authenticate users on wired and wireless ports
D. to authenticate users on wired ports
Correct Answer: A
QUESTION 11
Refer to the exhibit
Which controller shown in the exhibit is elected as the cluster leader?
A. Controller A
B. Controller ?
C. Controller C
D. Controller D
Correct Answer: B
QUESTION 12
An AP connects to a controller. Then, the AP loses power and reboots.
Which parameters will the AP remember and use from its initial connection? (Choose two.)
A. Server IP
B. AP group
C. AirWave server name
D. AP IP address and subnet mask
E. Mobility Master IP
Correct Answer: AB
QUESTION 13
An administrator needs to apply a patch to an Aruba environment to implement improvements for AirMatch. What is the
Aruba recommended approach for this process without a reboot?
A. Upgrade the AirMatch Loadable Service Module (LSM) on the Mobility Master.
B. Upgrade the ArubaOS by the use of Live Upgrades (in-service upgrades).
C. Upgrade the AirMatch Loadable Service Module (LSM) on each Mobility Controller.
D. Create controller partitions to minimize downtime.
Correct Answer: A
The above content: shared HPE6-A71 exam pdf, HPE6-A71 exam questions And answers, HPE6-A71 exam video,
and get the complete HPE6-A71 exam dumps path. For information about HPE6-A71 Dumps from Lead4pass (including PDF and VCE), please visit: https://www.leads4pass.com/hpe6-a71.html (96 Q&A)
ps. Get free HP HPE6-A71 dumps PDF online: https://drive.google.com/file/d/13773O7a9Gq8iTIffN31mnJbzTOyM-kkX/