The NSE7_SDW-6.4 dumps have been updated and are valid materials for the Fortinet NSE 7 – SD-WAN 6.4 Exam.
leads4pass NSE7_SDW-6.4 dumps address: https://www.leads4pass.com/nse7_sdw-6-4.html, is the best material to provide Fortinet NSE 7 – SD-WAN 6.4 Exam, go to the download page and you can find
There are three download methods: PDF, VCE, and PDF+VCE, which are three friendly download solutions provided by leads4pass, you can choose arbitrarily. Downloading either of the study styles according to your study habits will help you successfully pass the Fortinet NSE 7 – SD-WAN 6.4 Exam on the first attempt.
The right choice can help you succeed in the first step, reducing unnecessary trouble and expenses. Fortinet NSE 7 – SD-WAN 6.4 Exam effectively recommends leads4pass NSE7_SDW-6.4 dumps to help you succeed.
Do you know about the NSE 7 Network Security Architect certification exam?
The NSE 7 Network Security Architect certification exam includes:
- Fortinet NSE 7 – Advanced Analytics
- Fortinet NSE 7 – Advanced Threat Protection
- Fortinet NSE 7 – Enterprise Firewall
- Fortinet NSE 7 – FortiSOAR Design and Development
- Fortinet NSE 7 – LAN Edge (formerly Secure Access)
- Fortinet NSE 7 – OT Security
- Fortinet NSE 7 – Public Cloud Security
- Fortinet NSE 7 – SD-WAN
You have to pass one of the exams. And the Fortinet NSE 7 – SD-WAN 6.4 Exam we are introducing is for candidates’ knowledge and expertise in Fortinet SD-WAN solutions. NSE7_SDW-6.4 dumps are Fortinet NSE 7 – SD-WAN 6.4 Exam Materials, Help Your first attempt pass successfully.
Fortinet NSE7_SDW-6.4 Exam details you need to know:
The following basic information is what Fortinet NSE 7 – SD-WAN 6.4 candidates must know. Below I will share some things you need to know for the exam.
NSE7_SDW-6.4 is the Fortinet NSE 7 – SD-WAN 6.4 exam code, which is one of the NSE 7 Network Security Architect certifications. For specific information, you can view:
Vendor: Fortinet
Exam Code: NSE7_SDW-6.4
Exam Name: Fortinet NSE 7 – SD-WAN 6.4
Certification: NSE 7 Network Security Architect
Number of questions: 35
Exam time: 60 minutes
Language: English
Product version: FortiOS 7.0
Status: Available May 20, 2022
Fortinet NSE7_SDW-6.4 Exam Core:
The following is the core of the Fortinet NSE 7 – SD-WAN 6.4 exam, the core technology of the real exam, but don’t worry, the leads4pass NSE7_SDW-6.4 dumps developed by subject matter experts are around the core of the following:
SD-WAN configuration:
- Configure basic SD-WAN setup
- Configure SD-WAN rules
- Configure SD-WAN SLAs
- Configure SD-WAN routing
Central management:
- Centrally manage an SD-WAN infrastructure from FortiManager
- Troubleshoot central management problems
VPN:
- Implement a full or partially meshed redundant VPN infrastructure
- Troubleshoot VPN and ADVPN
SD-WAN troubleshooting:
- Troubleshoot SD-WAN
Come on, try the NSE7_SDW-6.4 free dumps first:
QUESTION 1:
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two.)
A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.
B. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.
C. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.
D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
Correct Answer: CD
QUESTION 2:
Which statement about using BGP routes in SD-WAN is true?
A. Adding static routes must be enabled on all ADVPN interfaces.
B. VPN topologies must be formed using only BGP dynamic routing with SD-WAN.
C. Learned routes can be used as dynamic destinations in SD-WAN rules.
D. Dynamic routing protocols can be used only with non-encrypted traffic.
Correct Answer: C
QUESTION 3:
Refer to exhibits.
Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members.
Based on the exhibits, which statement is correct?
A. The dead member interface stays unavailable until an administrator manually brings the interface back.
B. Port2 needs to wait 500 milliseconds to change the status from alive to dead.
C. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server.
D. Check interval is the time to wait before a packet sent by a member interface is considered lost.
Correct Answer: C
QUESTION 4:
Which three parameters are available to configure SD-WAN rules? (Choose three.)
A. Application signatures
B. Incoming interface
C. Internet service database (ISDB) address object
D. Source and destination IP address
E. Type of physical link connection
Correct Answer: CDE
QUESTION 5:
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
A. diagnose sys virtual-wan-link health-check
B. diagnose sys virtual-wan-link log
C. diagnose sys virtual-wan-link sla-log
D. diagnose sys virtual-wan-link intf-sla-log
Correct Answer: C
Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging
QUESTION 6:
Refer to exhibits.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds.
Which statement about the dead member is correct?
A. Port2 might become alive when a single response is received from an SLA server.
B. Dead members require manual administrator access to bring them back alive.
C. Subnets 100.64.1.0/24 and 172.20.0.0/16 are reachable only through port1.
D. SD-WAN interface becomes disabled and port1 becomes the WAN interface.
Correct Answer: C
QUESTION 7:
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two.)
A. Specify outgoing interface routing cost.
B. Configure SD-WAN rules interface preference.
C. Select SD-WAN balancing strategy.
D. Specify incoming interfaces in SD-WAN rules.
Correct Answer: AB
QUESTION 8:
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
B. Changes have been made on firewall policy ID 1 on FortiGate.
C. Firewall policy ID 1 has source NAT disabled.
D. FortiGate has terminated the session after a change on policy ID 1.
Correct Answer: B
QUESTION 9:
Refer to the exhibit.
Multiple IPsec VPNs are formed between two hub-and-spokes groups and site-to-site between Hub 1 and Hub 2. The administrator configured ADVPN on the topology of the dual region.
Which two statements are correct if a user in Toronto sends traffic to London? (Choose two.)
A. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
B. The first packets from Toronto to London are routed through Hub 1 and then to Hub 2.
C. London generates an IKE information message that contains the Toronto public IP address.
D. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
Correct Answer: AD
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/320160/example-advpnconfiguration
QUESTION 10:
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
A. The FortiGate cloud key has not been added to the FortiGate cloud portal.
B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager.
C. FortiGate has obtained a configuration from the platform template in the FortiGate cloud.
D. A factory reset was performed on FortiGate.
E. The zero-touch provisioning process has been completed internally, behind FortiGate.
Correct Answer: AE
QUESTION 11:
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two.)
A. Traffic has matched none of the FortiGate policy routes.
B. Matched traffic failed RPF and was caught by the rule.
C. The FIB lookup resolved interface was the SD-WAN interface.
D. An absolute SD-WAN rule was defined and matched traffic.
Correct Answer: AC
QUESTION 12:
Which two statements describe how IPsec phase 1 main mode id different from aggressive mode when performing IKE negotiation? (Choose two.)
A. A peer ID is included in the first packet from the initiator, along with suggested security policies.
B. XAuth is enabled as an additional level of authentication, which requires a username and password.
C. A total of six packets are exchanged between an initiator and a responder instead of three packets.
D. The use of Diffie Hellman keys is limited by the responder and needs initiator acceptance.
Correct Answer: BC
QUESTION 13:
Refer to the exhibit.
Based on the output shown in the exhibit, which two commands can be used by SD-WAN rules? (Choose two.)
A. set cost 15.
B. set source 100.64.1.1.
C. set priority 10.
D. set load-balance-mode source-IP-based.
Correct Answer: CD
……
NSE7_SDW-6.4 Free Dumps Online Download:https://drive.google.com/file/d/1dpLCcglwOgNbQxSRXC6bByoDToaMtkqP/view?usp=sharing
View 35 actual NSE7_SDW-6.4 exam questions and answers: Click Here.